Not all DVD movies have or default to a 5. Unplug the subwoofer from the AC outlet. It is designed to stand firmly on a traditional computer monitor. The triple input cable is permanently wired to the subwoofer. Because the subwoofer is powered on, touching the plug ends may cause an unexpected loud buzz.
|Date Added:||18 January 2008|
|File Size:||19.11 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Original Dell Altec Lansing Ada995 5.1 THX Certified Sound Speaker 4j133
Connecting the satellite speakers to the subwoofer Each Satellite speaker has a cable with a colored, mechanically-keyed plug attached to the cable end. See the figure below.
If the center channel speaker fails to sound the test tone, check its cable connection to the subwoofer. The subwoofer, the Right Front satellite and the Left Front satellite will each sound a test tone at the same time. All other adjustments for the speaker system are made using the computer or keyboard audio controls, including overall system volume.
The Subwoofer level control affects the subwoofer level only. lznsing
ADA / 4J FS | Altec Lansing ADA Dolby Digital
Make sure the three triple cable plugs are ada99 firmly into the correct jacks. The three cables separate from one another several inches from the end, and each of the three cables ends with a different colored plug:.
The difference in output between corner placement and side-wall placement is about 6dB – in favor of corner placement. Make sure the cyan plug is fully inserted.
Subwoofer emits loud humming or buzzing noise. The name of each speaker is printed on its back for easy identification.
AC cord is not connected to wall outlet Check to see if the LED is illuminated on the rear of the subwoofer. Your DVD software also comes pre-configured for 5.
To continue using , please upgrade your browser.
The satellites can be placed even with the front surface of the monitor’s screen or in cm behind it. Because the subwoofer is powered on, touching the plug ends may cause an unexpected loud buzz.
If your listening environment permits convenient wall-mount access, you may wish to take advantage of this feature by following these instructions:. WAV files often have little low frequency content. Open the speaker controls software and turn down the Sub LFE control. Subwoofer emits loud humming or buzzing noise Ground loop Move the power cord from the power surge protector lwnsing applicable and plug directly into an AC wall outlet.
No additional equalization is necessary. Identifies the Speaker Controls section.
When rotating the Subwoofer Level control, the center position can be detected by touch. Do not insert the power plug into an AC outlet until all connections are made.
Dell Altec Lansing Ada995 5.1 THX Certified Computer Speakers
To decrease the subwoofer level, turn the rotary control counter-clockwise The Subwoofer Level control is an important feature of lansig ADA Multimedia Speaker System. If the distance is greater than 5 ft 1. Using the self-diagnostic feature The ADA has a built-in diagnostic function to test the operation of all speakers. Triple cable is not connected to Santa Cruz sound card.
RCA phono connectors, color-coded and mechanically keyed. Should you need to purchase another, the replacement fuse is a Radio Shack part The three cables separate from one another several inches from the end, and each of the three cables ends lansign a different colored plug: To use this function: If either of the satellites fails to sound the test tone, check its cable connection to the subwoofer.
Move your cables and check to see that they are making a good connection. This speaker system is designed to produce the best possible sound in your listening environment right out-of-the-box. The subwoofer’s tone will be a lower frequency than the tone sounded through the satellites.